Temperature Calibrator

 TechnicaldataTypeTP 17 650 SControlsensorInternalDry blockTemperaturerange*RT...650 °CRT...1202 °FAccuracy±0.4 °C±0.72 °FStability±0.05 °C±0.09 °FMeasurementzone110...150 mm4.3... 5.91 in.Blockdimensions→ Diameter→ DepthØ 28 mm150 mmØ 1.10 in.5.91 in.DisplayunitDisplay2-line, 4-digit display Red / green, unit °C / °FDisplayrange0...650 °C32...1202 °FResolution0.01 °C between RT...99.99 °C, else 0.1 °C0.01 °F between RT...99.99 °F,0.1 °F between 100.0...999.9 °F, else 1 °FGeneraldataPC interfaceRS485,RS232 or USB (optional)Dimensions→ Width→ Height→ Depth 150 mm330 + 70 mm270 mm 5.91 in.12.99 + 2.76 in.10.63 in.WeightApprox. 7.5 kgApprox. 16.53 lbs.Powersupply230 / 240 VAC, 50 / 60 Hz,optional 100...115 VAC, 50 / 60 Hzoptional 100...240 VAC, 50 / 60 HzPowerconsumptionApprox. 1000 W* At an ambient temperature of 20 °C / 68 °FScope of deliveryTest certificateMains cableInsert exchange toolOperating manualAccessoriesTransport caseService transport bagAdapter sleevePC softwarePC cableDAkkS certificateWorks certificateAlat Ukur Kalibrasi

Alat Ukur Kalibrasi TypeMC 50.2MC 75.2Resistance thermometer (RTD)RTD signalgeneration and measurementPt50, Pt100, Pt200, Pt500, Pt1000, Cu10, Cu50, Ni100, Ni120, Ni1000Ω generator function0...4000 ΩΩ measurement function0...4000 ΩAccuracy (of rdg. + const.)±0.012 %Selectable temperature unit°C / °FMeasurement of multi-wire2 / 3 / 4Thermocouples (TC)TC signal generation and measurementJ, K, T, R, S, B, N, E, U, LmV generator function0...100 mVmV measurement function0...100 mVAccuracy (of rdg. + const.)±0.013 %Selectable temperature unit°C / °FInternal comparison point±0.3 °CCurrent (mA)Loop current signal generation0(4)...24 mALoop current signal measurement0(4)...50 mAAccuracy (of rdg. + const.)±0.0175 %Current loop supply24 V ±10 %, 22 mAHART compatible internal loop resistor250 ΩVoltage (V)Voltage signal generation0...20 VVoltage signal measurement0...50 VAccuracy (of rdg. + const.)±0.015 %Continuity (O / C)Continuity measurementO / CSwitching threshold "open"1 kΩFrequency and pulse (Hz)Frequency and pulse signal generation0.01 Hz...10 kHzFrequency and pulse signal measurement0.01 Hz...20 kHzAccuracy (of rdg. + const.)±0.005 %Pressure signals (bar)Pressure measurementwith external pressure module √Editable pressure units √Connection via DIN socket 5-pinMC 50.2Operator guidanceSeparate channels for parallel signal processingMenu with pull-down windowsProgramming and control via PC Graphic display of connection optionsConfiguration files for test adjustments (10)Battery supply / Operating time Approx. 25 h with Auto-Power off MC 75.2Operator guidanceSeparate channels for parallel signal processing Menu with pull-down windowsProgramming and control via PC Graphic display of connection optionsConfiguration files for test adjustments (10)Test report generation / Calibration routines (10)Battery supply / Operating time Approx. 20 h with Auto-Power offTest certificateSoftware (optional)►Pressure measurementMC 75.2 with external pressure modulesFor universal on-site use, the MC 75 2 simulator is capable of measuring different pressures from -1 bar to 1000 bar.The EPM plug-in modules are based on intelligent sensor technology with storage for measuring range and accuracy. Connection takes place via a DIN socket with Plug & Play function.For the best measuring results with high accuracy, various absolute or relative pressure ranges in three precision classes are available.EXTERNAL PRESSURE MODULE :Technical dataType EPMMeasuring rate400 measurements/sec.Digital signalsRS 485Electrical connection5-pin 1 m shielded connecting cableMedium temperature10…40 °CPressure connectionG¼ stainless steel 1.4404Degree of protectionIP65DimensionsApprox. D = 30 mm, L = 110 mmWeightApprox. 140 g► EPM VERSION AVAILABLE:Type EPMModel AModel BModel C Precision±0.05 % full scale±0.025 % full scale±0.01 % full scaleMax. pressure range1-1...1 bar rel. (Pr)  2 bar0...1 bar abs. (Paa)   3-1...3 bar rel. (Pr)  5 bar0…3 bar abs. (Paa)   4-1…4 bar rel. (PR)-1…4 bar rel. (PA) 20 bar0…4 bar abs. (PAA)0…4 bar abs. (PAA)  7-1…7 bar rel. (PR)-1…7 bar rel. (PA) 20 bar0…7 bar abs. (PAA)0…7 bar abs. (PAA)  10-1…10 bar rel. (Pr)-1…10 bar rel. (PA)-1…10 bar rel. (Pa)20 bar0…10 bar abs. (Paa)0…10 bar abs. (PAA)0…10 bar abs. (Paa) 12-1…12 bar rel. (PR)-1…12 bar rel. (PA) 60 bar0…12 bar abs. (PAA)0…12 bar abs. (PAA)  20-1…20 bar rel. (PR)-1…20 bar rel. (PA) 60 bar0…20 bar abs. (PAA)0…20 bar abs. (PAA)  30-1…30 bar rel. (Pr)-1…30 bar rel. (PA)-1…30 bar rel. (Pa)60 bar0…30 bar abs. (Paa)0…30 bar abs. (PAA)0…30 bar abs. (Paa) 40-1…40 bar rel. (PA)-1…40 bar rel. (PA) 200 bar0…40 bar abs. (PAA)0…40 bar abs. (PAA)  700…70 bar rel. (PA)0…70 bar rel. (PA) 200 bar0…70 bar abs. (PAA)0…70 bar abs. (PAA)  1000…100 bar rel. (Pa)0…100 bar rel. (PA)0…100 bar rel. (Pa)200 bar0…100 bar abs. (Paa)0…100 bar abs. (PAA)0…100 bar abs. (Paa) 1200…120 bar rel. (PA)0…120 bar rel. (PA) 400 bar0…120 bar abs. (PAA)0…120 bar abs. (PAA)  1350…135 bar rel. (PA)0…135 bar rel. (PA) 400 bar0…135 bar abs. (PAA)0…135 bar abs. (PAA)  1600…160 bar rel. (PA)0…160 bar rel. (PA) 400 bar0…160 bar abs. (PAA)0…160 bar abs. (PAA)  2000…200 bar rel. (PA)0…200 bar rel. (PA) 400 bar0…200 bar abs. (PAA)0…200 bar abs. (PAA)  3000…300 bar rel. (Pa)0…300 bar rel. (PA)0…300 bar rel. (Pa)400 bar0…300 bar abs. (Paa)0…300 bar abs. (PAA)0…300 bar abs. (Paa) 4000…400 bar rel. (PA)0…400 bar rel. (PA) 1000 bar0…400 bar abs. (PAA)0…400 bar abs. (PAA)  7000…700 bar rel. (Pa)0…700 bar rel. (PA)0…700 bar rel. (Pa)1000 bar0…700 bar abs. (Paa)0…700 bar abs. (PAA)0…700 bar abs. (Paa) 10000…1000 bar rel. (Pa)0…1000 bar rel. (PA)0…1000 bar rel. (Pa)1000 bar0…1000 bar abs. (Paa)0…1000 bar abs. (PAA)0…1000 bar abs. (Paa)  PR: Relative pressure measuring cell, ambient pressure as zero pointPAA: Absolute pressure measuring cell, vacuum as zero pointPA: Absolute pressure measuring cell, ambient pressure as zero point 

TechnicaldataTypeTP M 255 SControlsensorInternalMicroBathTemperaturerange*RT...255 °CRT...491 °FAccuracy±0.2 °C±0.36 °FStability±0.05 °C±0.09 °FMeasurementzone110...150 mm4.33...5.91 in.Blockdimensions→ Diameter→ DepthØ 60 mm170 mmØ 2.36 in.6.69 in.DisplayunitDisplay2-line, 4-digit display Red / green, unit °C / °FDisplayrange0...255 °C32...491 °FResolution0.01 °C between RT...99.99 °C, else 0.1 °C0.01 °F between RT...99.99 °F, else 0.1 °FGeneraldataPC interfaceRS485,RS232 or USB (optional)Dimensions→ Width→ Height→ Depth 150 mm330 + 70 mm270 mm 5.91 in.12.99 + 2.76 in.10.63 in.WeightApprox. 7.5 kgApprox. 16.53 lbs.Powersupply230 / 240 VAC, 50 / 60 Hz,optional 100...115 VAC, 50 / 60 Hzoptional 100...240 VAC, 50 / 60 HzPowerconsumptionApprox. 1000 W* At an ambient temperature of 20 °C / 68 °F Alat ukur kalibrasi

Alat Ukur Kalibrasi SIKATechnicaldataTypeTP 28 1300 EControlsensorInternalDry blockTemperaturerange*400...1300 °C752...2372 °FTolerance±2 °C±3.6 °FStability±0.5 °C±0.9 °FMeasurementzoneat 200 mmat 7.87 inBlockdimensions → Diameter → DepthØ 28 mm200 mmØ 1.10 in7.87 inDisplayunitDisplay2-line, 4-digit display Red / green, unit °C / °FDisplayrange0...1300 °C32...2372 °FResolution1 °C1 °FGeneraldataInterfaceRS485,RS232 or USB (optional)Dimensions→ Width→ Height→Depth 510 mm290 mm415 + 100 mm 20.08 in11.42 in16.34 + 3.94 inWeightApprox. 17,5 kgApprox. 38.58 lbsPowersupply100...240 VAC, 50 / 60 HzPowerconsumptionApprox. 1000 W* At an ambient temperature of 20 °C / 68 °FScope of deliveryTest certificateMains cableInsert exchange toolOperating manualAccessoriesTransport caseAdapter sleevePC softwarePC cableDAkkS certificateWorks certificate

Alat ukur kalibrasi Temperature Calibrator SIKAScope of delivery:Test certificateMains cableInsert exchange toolPC- and network cableOperating manualSensor basket, suction pump, transport coverMagnetic stirrer with magnet lifterSensor lid with 5 silicone plugsOptional AccessoriesCalibration liquidTransport caseAdapter sleeveTube insertInfrared calibration sleeveSurface calibration sleeveExternal reference sensor TF 255-3-300PC softwareNetwork-switch, barcode-reader, WLAN-routerDAKKS certificateWorks certificate 

Alat Ukur Kalibrasi Temperature CalibratorDry blockTemperature range*RT...450 °CDisplay accuracy±0.2 °CTemperature stability±0.010 °CHomogeneous temperature zoneBottom 40 mm of the sleeveInfraredTemperature range*RT...450 °CDisplay accuracy±0.2 °CTemperature stability±0.030 °CEmission factor1SurfaceTemperature range*RT...450 °CDisplay accuracy±1 °CTemperature stability±0.250 °C Calibration volumeØ 60 mm x 150 mmGeneral dataDisplayBrilliant color touchscreen (7 inches)multi panel safety glassAdjustable temperature range0...450 °CResolution0.1 / 0.01 / 0.001 °C / °F / K (selectable)Scope of deliveryTest certificateMains cableInsert exchange toolPC- and network cableOperating manualOptional accessoriesTransport caseAdapter sleeveExternal reference sensor TF 450-4.5-300PC softwareNetwork-switch, barcode-reader, WLAN-routerDAkkS certificateWorks certificate 

Alat ukur kalibrasiTechnicaldata TypeTP 17 450ControlsensorInternalDry block Temperaturerange*RT...450 °CRT...842 °FAccuracy±0.6 °C±1.08 °FStability±0.1 °C±0.18 °FMeasurementzone110...150 mm4.3...5.91 in.Blockdimensions → Diameter→ DepthØ 60 mm150 mmØ 2.36 in.5.91 in.Displayunit Display2-line, 4-digit display Red / green, unit °C / °FDisplayrange0...450 °C32...842 °FResolution0.1 °C0.1°FGeneraldata Dimensions→ Width→ Height→ Depth 150 mm330 + 70 mm270 mm 5.91 in.12.99 + 2.76 in.10.63 in.WeightApprox. 7.5 kgApprox. 16.53 lbs.Powersupply230 / 240 VAC, 50 / 60 HzPowerconsumptionApprox. 2000 W* At an ambient temperature of 20 °C / 68 °F

Alat Ukur Kalibrasi Multi Fungsi: TP 3M 165 E2  Micro bath functionThe use of calibration liquids offers certain advantages if temperature sensors with an unusual shape and size are to be tested. The test item is immersed directly into the liquid without an insulating air gap, resulting in direct temperature contact between the calibrator and the test item. The liquid, such as silicone oil, is chosen depending on the calibration temperature required. The continuous adjustment of the magnetic stirrer together with the removable sensor basket agitates the calibration liquid to create a large measuring zone. Furthermore, the sensor basket guarantees unhindered stirring and helps protect the tank floor.Dry-block functionThe optimum thermal coupling from the block to test item is achieved with the correct adapter sleeve. Ideally, the internal diameter of the sleeve is 0.5 mm larger than the outer diameter of the test item. With the aid of the adapter sleeve, straight temperature sensors of virtually any length and diameter can be calibrated. The dry block covers the entire temperature range without the need to change the calibration medium. Viscosity, flash points or outgassing are of no concern.Black body functionA patented infrared calibration sleeve is used to calibrate IR pyrometers or thermal imaging cameras. The special surface structure and the asymmetrical shapes create a „cavity radiator“ with an emission factor of 0.9994, prevent the reflection of interference radiation and emit the required temperature in an ideal form. The pyrometer is simply held at the specified distance above the measurement opening, thereby forming the desired measurement area on the bottom for the calibration to be performed. A support base can be fitted directly on the unit.Surface temperature functionSurface temperature sensors are calibrated using special sleeves that are fitted vertically with the required contact force. Switching calibration control to the external reference sensor creates the best possible temperature reference point on the surface of the sleeve. The reference sensor is located directly beneath the abutting face of the sleeve. The sleeve is designed in such a way that the best temperature homogeneity is achieved in the centre of the abutting face. The special design of the abutting face enables good thermal contact. There is no need to use a thermally conductive paste or other thermal conduction aids.Spesifikasi Teknis:    Scope of deliveryTest certificateMains cableInsert exchange toolPC- and network cableOperating manualSensor basket, suction pump, transport coverMagnetic stirrer with magnet lifterSensor lid with 5 silicone plugs Accessoriescalibration liquidTransport caseAdapter sleeveTube insertInfrared calibration sleeveSurface calibration sleeveExternal reference sensor TF 255-3-300PC softwareNetwork-switch, barcode-reader, WLAN-routerDAkkS certificateWorks certificate 

Alat Ukur Kalibrasi Temperature SIKATechnicaldataTypeTP M 165 SControlsensorInternalMicroBathTemperaturerange*-35...165 °C-31...329 °FAccuracy±0.1 °C±0.18 °FStability±0.05 °C±0.09 °FMeasurementzone110...150 mm4.33...5.91 inBlockdimensions→ Diameter→ DepthØ 60 mm170 mmØ 2.36 in.6.69 in.DisplayunitDisplay2-line, 4-digit display Red / green, unit °C / °FDisplayrange-50...165 °C-58...329 °FResolution0.01 °C between-9.99...99.99 °C,else 0.1 °C0.01 °F between-9.99...99.99 °F,else 0.1 °FGeneraldataPC interfaceRS485,RS232 or USB (optional)Dimensions→ Width→ Height→ Depth 210 mm380 + 50 mm300 mm 8.27 in14.96 + 1.97 in11.81 inWeightApprox. 12.5 kgApprox. 27.56 lbs.Powersupply100...240 VAC, 50 / 60 HzPowerconsumptionApprox. 375 W* At an ambient temperature of 20 °C / 68 °F   Scope of deliveryTest certificateMains cableOperating manualSensor basket, suction pump, transport coverMagnetic stirrer with magnet lifterSensor lid with 5 silicone plugsAccessoriesCalibration liquidTransport caseTube insertPC softwarePC cableDAkkS certificateWorks certificate  

Alat Ukur Kalibrasi TemperaturTechnicaldataTypeTP 17 650 MControlsensorInternalDry blockTemperaturerange*RT...650 °CRT...1202 °FAccuracy±1 °C±1.8 °FStability±0.1 °C±0.2 °FMeasurementzone110...150 mm4.3...5.91 inBlockdimensions→ Diameter→ DepthØ 28 mm150 mmØ 1.10 in5.91 inDisplayunitDisplay2-line, 4-digit display Red / green, unit °C / °FDisplayrange0...650 °C32...1202 °FResolution1 °C1 °FGeneraldataDimensions→ Width→ Height→ Depth 150 mm330 + 70 mm270 mm 5.91 in12.99 + 2.76 in10.63 inWeightApprox. 7.5 kgApprox. 16.53 lbsPowersupply230 / 240 VAC, 50 / 60 Hz,optional 100...115 VAC, 50 / 60 Hzoptional 100...240 VAC, 50 / 60 HzPowerconsumptionApprox. 1000 W* At an ambient temperature of 20 °C / 68 °FScope of deliveryTest certificateMains cableInsert exchange toolOperating manualAccessoriesTransport caseService transport bagAdapter sleeveDAkkS certificateWorks certificate