phone Phone
+628161105088
Bendera Indonesia Indonesia | Bendera Inggris English
close
menu

CV. Kalindra Mitra Niaga

phone

Kalibrasi Flow Meter

Jual Produk Kalibrasi Flow Meter dari CV. Kalindra Mitra Niaga. CV. Kalindra Mitra Niaga menjual produk Kalibrasi Flow Meter dan juga Kalibrator Tekanan/Pressure Calibrator, Kalibrator Temperatur/Temperature Calibrator, Dead Weight Tester, Digital Pressure Gauge, Calibration Pump/Hand pump, Test Bench. Untuk penawaran dan permintaan, bisa klik ke tombol permintaan penawaran.
  • FLOW METER KALIBRATOR
    Detil Produk
    FLOW METER KALIBRATOR
    Harga : IDR CALL
    Minta Penawaran

    Detil Produk :

    Flow Meter Kalibrasi sistim komparasi

    MOBILE FLOW METER CALIBRATION SYSTEM TROLLEY MOUNTED WITH COMPARISON METHOD

    • MOBI-FMCS 1580 Mobile Flow Meter Calibration System is designed for calibrating flow meters of sizes from DN 15 to DN 80 through Comparison Method.
    • The System has Two Trolley Type Section (One with Reservoir & Pumps Section and the other Test Rig with Master Electro Magnetic Flow Meters) & this Calibration system is manually operated.
    • Test Rig has Single Test Line to accommodate / mount Unit under Test. Only one No. of Flow meter can be calibrated at a time.
    • Calibrated & Certified Electromagnetic Flow meters will be used as the Standard / Reference Masters against which the Flow Meter under Test will be calibrated. To effectively cover the Flow Rates (from minimum 5 LPM to maximum 1500 LPM) in Meter Sizes (DN 15 to DN 80), Two Nos. of Electromagnetic Flow meter (DN 15 & DN65) shall be used as “Standard”.

    Calibrated Accuracy of the Electromagnetic Flow meter shall be ± 0.2% of Reading.

    • Pressure Measurement devices will be provided at both Upstream / Downstream of the test rig to measure the Inlet / Outlet Pressure of water.
    • Temperature measurement devices will be provided to measure the Temperature of Water.
    • Flow Control through Manual Throttling Valves & VFD connected to the Pump.
    • Best “Accuracy” of ‘Unit Under Test’ that can be Tested / Calibrated (Recommended): ± 0.5%.

    TECHNICAL DESCRIPTION:

     System Operation

      Manual

     Meter Sizes

      DN 15 to DN 80

     Number  of  meter  can  be calibrated at a time

      One

     Flow Rate

      Minimum 5 LPM &  Maximum 1500 LPM

    Calibration Media

      Water (Correction factors for other Types of liquids through our “Flocal” software)

      Power Supply

     3 Phase, Standard Voltage 380 to 415V AC, 50Hz, 25 Kw Single Phase –  230V AC/50 Hz

      Overall dimensions

    Trolley 1 – Reservoir with Pumps section: Approx. 1000 x 1000 x 1000 mm (LBH) Trolley 2 – Test Rig With Master Flow Meter: Approx. 1000 x 1000 x 1000 mm (LBH)

     Construction materials

    Powder coated mild steel for test bench frame. All other wetted parts shall be of Stainless Steel.

      Control panel

    To mount Temperature Indicator, Start / Stop Button, Emergency – ON / OFF, Pump – ON / OFF, VFD Control Knob, will be provide

      Commputer System

    Software - to handle / operate the process, display the parameters like flow rate / Total Volume, Temperature & Pressure readings.

    • UUT’s – Flow Reading, Model/Serial No and Pressure & Temperature Readings to be keyed by manually.
    • The   Software   “Flocal”   will   generate   the   Calibration Report.

    LAPTOP & Printer – Your/Customer Scope.

    RESERVOIR WITH PUMPS SECTION – Trolley 1

      Storage Tank / Water   Reservoir (SS)

    Mild Steel (Powder Coated) Inside: Epoxy Coated Capacity : 1000 Liters

     Water supply

     Through Pump

      Low:

      5 m3/hr. @ 3 bar

      0.75 Kw / 3 Phase / 50 Hz

      High:

      120 m3/hr. @ 3 bar

      15 Kw / 3 Phase / 50 Hz

      Flow Control

      Manual Throttling Valves & VFD connected to the Pump

      TEST RIG WITH MASTER FLOW METER – Trolley 2

     Calibration Master

      2 Nos. Of Calibrated & Certified Electromagnetic Flow Meters of Size

      DN 15

      Flow Range: 2 LPM to 100 LPM Calibrated Accuracy: ± 0.2% of Reading.

      DN 65

      Flow Range: 40 LPM to 2000 LPM Calibrated Accuracy: ± 0.2% of Reading.

     Number of Test Line

      Single

     Meter Clamping, Meter  Mounting

      Manual Clamping

     Pressure Measurement

      Pressure Gauges (Inlet / Outlet)

      Range: 0 to 10 bar Dial Size: 100 mm, Accuracy: 1.6% FS

     Temperature Measurement

      RTD with Digital Indicator

      Range: 0 to 100°C; Display: 3 ½ Digit

     

     Read More
    Ya, Saya Tertarik! Detil Produk

    • Navigation

    CV. Kalindra Mitra Niaga

      
    • Alamat:
    • Poris Indah, Jalan Mawar Raya Blok C/97, Kota Tangerang
      Banten , Indonesia
    Telepon:
    08161105088
     

    Powered by Indotrading.

    Bendera Indonesia Indonesia  |  Bendera Inggris English